ProSoft Technology MVI71-GSC - Manual (Page 28)

MVI71-GSC ♦ PLC Platform Installing and Configuring the Module
Generic Serial Communication Module
Page 28 of 82 ProSoft Technology, Inc.
January 31, 2008
Word
Offset Description
34 Port 2 transmit character count
35 Port 2 transmit block count
36 Port 2 error word
37 to 63 Reserved
When the side-connect interface is used, the status data is automatically placed
in the application configuration file starting at offset 200. The following table lists
the location and content of the status data area when the side-connect interface
is utilized:
Word
Offset Description
200 Program cycle counter
201 to 202 Product name as ASCII string
203 to 204 Revision level as ASCII string
205 to 206 Operating system level as ASCII string
207 to 208 Run number as ASCII string
209 Number of blocks transferred from module to processor
210 Number of blocks transferred from processor to module
211 Number of blocks parsed by module
Module
Status
212 Number of block errors in module
213 Port 1 receive state:
-1 = Listening for data
1 = Receiving Port Data
2 = Waiting for Backplane transfer
214 Port 1 receive character count
215 Port 1 receive block count
216 Port 1 transmit state:
0 = Waiting for Data to Send
1 = RTS On
2 = RTS Timeout
3 = Sending data
4 = Waiting for RTS Off
5 = RTS turned off
30 = Intercharacter Delay
31 = Intercharacter Delay
32 = Intercharacter Delay
100 = Message Delay before Transmit
101 = Message Delay before Transmit
217 Port 1 transmit character count
218 Port 1 transmit block count
Port 1
Status
219 Port 1 error word