ProSoft Technology MVI71-GSC - Manual (Page 14)

MVI71-GSC ♦ PLC Platform Start Here
Generic Serial Communication Module
Page 14 of 82 ProSoft Technology, Inc.
January 31, 2008
1.6 Download the Sample Program to the Processor
To download the sample program from RSLogix 5 to the PLC processor:
Note: The key switch on the front of the PLC processor must be in the REM position.
1 If you are not already online to the processor, open the Communications
menu, and then choose Download. RSLogix will establish communication
with the processor.
2 Click the Download button to transfer the sample program to the processor.
3 When prompted, choose Computer to PLC
4 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.