Installing the MVI69-DFCM module requires a reasonable working knowledge of
the Rockwell Automation hardware, the MVI69-DFCM Module and the
application in which they will be used.

Caution: It is important that those responsible for implementation can complete the

application without exposing personnel, or equipment, to unsafe or inappropriate working
conditions. Safety, quality and experience are key factors in a successful installation.

1.1 System

Requirements

The MVI69-DFCM module requires the following minimum hardware and
software components:

Rockwell Automation CompactLogix or MicroLogix processor, with

compatible power supply and one free slot in the rack, for the MVI69-DFCM
module. The module requires 800mA of available power.

Important: The MVI69-DFCM module has a power supply distance rating of 2 (L43 and L45
installations on first 2 slots of 1769 bus).
Important: For 1769-L23x processors, please make note of the following limitations.

1769-L23-QBFC1B = 800mA at 5Vdc (1 MVI69-DFCM will use all 800mA of available power.
No other modules can be used with an MVI69 module connected to this processor).

1769-L23E-QB1B = 1000mA at 5Vdc (1 MVI69-DFCM will use 800mA of available power. One
other module can be used on this rack provided it consumes less than 200mA at 5Vdc.

1769-L23E-QBFC1B = 450mA at 5Vdc (no MVI69 module can be used with this processor)

Rockwell Automation RSLogix 5000 (CompactLogix) or RSLogix 500

(MicroLogix) programming software

Rockwell Automation RSLinx communication software