ProSoft Technology MVI69-DFCM - Manual (Page 77)

Reference MVI69-DFCM ♦ CompactLogix or MicroLogix Platform
DF1 Interface Module
ProSoft Technology, Inc. Page 77 of 117
November 3, 2008
Set Module Time Response
Read Block: Set Module Time
Offset Description Length
0 9972 1
1 Write Block ID 1
2 to (n+1) Spare
n=60, 120, or 240 depending on what is entered in the Block Transfer Size parameter (refer to the
configuration file).
Get Module Time for Processor Time
Write Block: Get Module Time
Offset Description Length
0 9973 1
1 to n Spare
n=60, 120, or 240 depending on what is entered in the Block Transfer Size parameter (refer to the
configuration file).
Read Block: Write Module Time
Offset Description Length
0 9973 1
1 Write Block ID 1
2 Year (0 to 9999) 1
3 Month (1 to 12) 1
4 Day (1 to 31) 1
5 Hour (0 to 23) 1
6 Minutes (0 to 59) 1
7 Seconds (0 to 59) 1
8 to n Spare
n=60, 120, or 240 depending on what is entered in the Block Transfer Size parameter (refer to the
configuration file).
Warm Boot
This block is sent from the CompactLogix or MicroLogix processor to the module
(output image) when the module is required to perform a warm-boot (software
reset) operation. The structure of the control block is shown below:
Offset Description Length
0 9998 1
1 to n Spare 247
n=60, 120, or 240 depending on what is entered in the Block Transfer Size parameter (refer to the
configuration file).