ProSoft Technology MVI69L-MBTCP - Manual (Page 87)

MVI69L-MBTCP ♦ CompactLogix Platform Using Controller Tags
Communication Module User Manual
ProSoft Technology, Inc. Page 87 of 152
January 6, 2014
5.3.4.3 MBTCP.STATUS.EventSeqStatus
This array contains the status of the event command queue.
Tag Name Description
MBTCP.STATUS.EventSeqStatus.
ClientID Specifies Client (0 - 9) to request event
status data from
MBTCP.STATUS.EventSeqStatus.
MessageCount Number of Event Sequence Messages in
block (0 to15)
MBTCP.STATUS.EventSeqStatus.
SeqNum_RetErrCode[x] Sequence Number returned Error Code
5.3.4.4 MBTCP.STATUS.EventSeqCounts
This array indicates the number of commands waiting in the command queue.
Tag Name Description
MBTCP.STATUS.EventSeqCounts.
ClientCmdCount_EventSeqMessage
[x] Event command quantity waiting in queue
There are two bytes of status data per
Client. See below for more details.
Byte 1: Number of Event sequence commands for which status has not yet been
retrieved (up to 15). This corresponds to the
MNETC.STATUS.EventSeqCmdPending.Client[x]_QueueCount controller tag.
Byte 2: Total number of commands waiting in the command queue. This includes
Event Commands, Event Commands with Sequence Numbers, and Command
Control messages. This corresponds to the
MBTCP.STATUS.EventSeqStatus.MessageCount controller tag.