Event sequence command error status blocks – ProSoft Technology MVI69L-MBTCP User Manual
Page 130

Reference
MVI69L-MBTCP ♦ CompactLogix Platform
User Manual
Communication Module
Page 130 of 152
ProSoft Technology, Inc.
January 6, 2014
7.4.4 Event Sequence Command Error Status Blocks
Block 4100 to 4119: Event Sequence Command Error Status Request
This block displays the result of each command sent to the Client. The request
includes the Client identification and the command sequence number. The
response is the event count and error code for each event. A value of
‘0’ in the
error code means there was no error detected.
Block 4100 to 4119: Request from Processor to Module
Offset
Description
0
Block ID 4100 to 4119 indicates this block will trigger the event sequence
command error status request of a specific MVI69L-MBTCP client. The last two
digits indicate which Client to utilize.
Example: ‘4108’ will utilize Client 8
1 to 239
Spare
Block 4100 to 4119: Response from Module to Processor
Offset
Description
0
Block ID 4100 to 4119 requested by the processor
1
Write Block ID
2
Number of Event Sequence Messages in block (0 to 15)
3
Sequence Number
4
Return Error Code
5
Sequence Number
6
Return Error Code
7
Sequence Number
8
Return Error Code
…
…
…
…
31
Sequence Number
32
Return Error Code
33 to 239
Spare