ProSoft Technology MVI69L-MBTCP - Manual (Page 50)

MVI69L-MBTCP Configuration MVI69L-MBTCP ♦ CompactLogix Platform
User Manual Communication Module
Page 50 of 152 ProSoft Technology, Inc.
January 6, 2014
initialization. If the value is set to Yes, the data will be
initialized with Read Register Data values from the
processor. Use of this option requires associated ladder
logic to pass the data from the processor to the module.
Slot Number 1 to x Represents the slot in the CompactLogix rack where the
module resides.
3.2.2 MBTCP Servers
This section applies to configuring the MVI69L-MBTCP Server (slave) Driver.
Parameter Value Description
Start Active Yes or No Specifies whether or not the port and commands will be
active upon module boot-up.
Pass-Through
Mode Client, Server,
or Server with
Pass-Through This parameter specifies which device type the port will
emulate. Refer to page 72 for more information on the
Server with Pass-Through option.
Float Flag Yes or No Specifies how the Server driver will respond to Function Code
3, 6, and 16 commands (read and write Holding Registers)
from a remote Client when it is moving 32-bit floating-point
data.