HP ScanJet Pro 4500 fn1 - Manual (Page 37)

Clean the product
Occasional cleaning of the scanner helps ensure high-quality scans. The amount of care necessary depends
on several factors, including the amount of use and the environment. Perform routine cleaning as necessary.
Clean the scanner glass
Clean the scanner glass periodically, including any time dust or debris is present.
Make sure to have the following items before cleaning:
● Clean, lint-free or micro-fiber cloths
● Glass Cleaner or clean water
CAUTION: Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride as
these chemicals can damage the scanning glass.
Avoid using isopropyl alcohol as it can leave streaks on the glass.
To clean the scanning glass, follow these steps:
1. Lift up the document feeder.
2. Use a clean, lint-free cloth moistened with water or spray the glass cleaner on a clean, lint-free cloth,
and then thoroughly clean the flatbed scanner glass.
CAUTION: Do not spray the glass cleaner directly on the scanner glass as this might cause permanent
damage.
3. Dry the scanner glass with a dry, soft, lint-free cloth.
NOTE: Make sure to dry the scanner glass completely.
4. Turn on the scanner.
The scanner is now ready to use.
ENWW Clean the product 29