Method to load documents, Load same-sized documents, Method to load documents load same-sized documents – HP ScanJet Pro 4500 fn1 User Manual
Page 25
●
Slide the paper guides to fit the width of the document. If there is any gap between the paper guides
and the edges of the documents, the scanned image might be skewed.
NOTE:
When loading small documents like checks, place the longest edge parallel to the paper width
guides.
Figure 3-2
Adjust paper guides
ScanJet Pr
o 4500 f1
Method to load documents
Determine the type of documents to load in the ADF input tray, and then use one of the following methods:
●
●
Load documents on the scanner glass
NOTE:
To scan fragile documents (such as photos or documents on wrinkled or very light paper), place the
document face down on the scanning glass.
Load same-sized documents
Make sure to refer the section
Required guidelines before loading documents
, and then follow the following
steps to load same-sized documents in the ADF input tray:
1.
Tap the long edge of the pages on a flat surface, then rotate and tap the top edge of the document
pages to align the edges of the document pages.
Load originals
17