3 led indications – PLANET IFT-802 User Manual
Page 8
2.1.3 LED Indications
There are 9 diagnostic LEDs located on the Front panel of industrial media converter. They provide
real-time information of system and optional status. The following table provides description of the LED
status and their meanings for the industrial media converter.
LED
Status
Meaning
Green
When the IFT-802 has power input s the LED will light on
Power
Off
No any power inputs
Green Power
on
Power 1
Off
No power inputs
Green Power
on
Power 2
Off
No power inputs
Orange
Power failure or UTP port failure or Fiber port failure
Fault
Off
No Power failure or UTP port failure or Fiber port failure occurs or the
port alarm disable
Green
The port is linking with its link partner.
Blinks
The port is transmitting or receiving packets from the FX device.
LNK/ACT(Fiber)
Off
No device attached
Orange
The port is operating in full-duplex mode.
FDX (Fiber)
Off
Half-duplex mode or no device attached
Green
In 100Mbps transmitting speed
10/100(UTP)
Off
In 10Mbps transmitting speed
Green
The port is linking with its link partner.
Blinks
The unit is transmitting or receiving packets from the devices.
LNK/ACT(UTP)
Off
No device attached
Orange
The port is operating in full-duplex mode.
FDX (UTP)
Off
Half-duplex mode or no device attached