PLANET IFT-802 - Manual (Page 7)

2. INSTALLATION
This section describes the functionalities of the Converter’s components and guides how to install it on
the rack or mount to the wall. Basic knowledge of networking is assumed. Please read this chapter
completely before continuing.
2.1 Product Description
2.1.1 Product Overview
The PLANET IFT-802 industrial 10/100BaseTX to 100BaseFX Media Converter is a cost- effective
solution for the converting 10/100Base-TX (Auto MDI/MDIX) to 100Base-FX cabling. It provides two
power inputs that can be connected simultaneously to the DC power sources. If one power input fails, the
other one acts as a backup.
The PLANET IFT-802 also provides relay alarm outputs to warn when the port link failure, so the
technician can respond quickly with appropriate emergency operation procedures. Also, there are DIP-
switches to set the operation mode for relay alarm, Fiber ports, link loss forwarding function, and UTP
operation mode.
2.1.2 Switch Front Panel
Figure 2-1 shows the front panel of the converter.
Figure 2-1 IFT-802 Front Panel