2 mounting installation, 1 din-rail mounting – PLANET IFT-802 User Manual

Page 11

Fault Alarm Contact

24V DC Buzzer

24V Battery

The open circuit will form

when the power failure or

port link failure.

The fault alarm device will

send a warning signal t

warn the user, ex: alarm

sound or flash light.

2.2 Mounting Installation

This section describes how to install the Converter and make connections to it. Please read the following

topics and perform the procedures in the order being presented.

2.2.1 DIN-Rail mounting

The DIN-Rail is screwed on the Converter when out of factory. If the DIN-Rail is not screwed on the

Converter, please see the following figure to screw the DIN-Rail on the switch. To hang the Converter,

follow the below steps: