2 wall mount plate mounting – PLANET IFT-802 User Manual

Page 12

Step1:

Insert the top of DIN-Rail into the track.

Step2:

Lightly push the button of DIN-Rail into the track.

Step3:

Check the DIN-Rail is tightly on the track.

Step4:

To remove the Converter from the track, reverse steps above.

2.2.2 Wall Mount Plate Mounting

To install the converter to the wall, please follows the instructions described below.

Step1:

Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.

Step2:

Place the wall mount plate on the rear panel of the industrial switch.