PLANET NAS-7200 - Manual (Page 13)

1
Chapter 5. Configuration
• This procedure only needs to be done ONCE, by the SATA NAS Server’s Adminis-
trator.
• Other LAN users should follow the advice given in using your SATA NAS
Server described in the following section.
Quick Setup with the SATA NAS Server Wizard
1. Please insert User’s Manual and Utility CD into the CD-ROM drive to initiate the
autorun program. Once completed a menu screen will appear.
2. Click on “Initial Utility” hyper link to initiate the installation. If the autorun
program is not process in your PC, you can click the “Start” button and choose
“Run”. (Suppose “E” is your CD-ROM drive). When the dialog box appears, enter
“E:\Utility\Setup.exe” and press enter key. You will see the dialog box as below.
Please click the “Setup” button.
3. After click, you will see the screen as below. The utility will auto search your
network and find out your SATA NAS Server.