PLANET NAS-7200 - Manual (Page 11)

11
5. To install Disk 2 that located on right side (rear view), make sure HDD top face
to right and connector side in front then slide the HDD into slot
6. Put the rear cover of NAS-7200 back to finish HDD install
7. Secure the 2 HDD drivers by mounting 4 screws.
HDD Remove
1. Make sure the NAS-7200 is power off
2. Open rear cover of NAS-7200
3. Pull out the HDD till HDD connector release then the HDD can slide out of slot.