PLANET WSG-500 - Manual (Page 7)

7
Buttom Panel
COM 1 Serial Port for connection with a POS printer.
COM 2
Serial Port for connection with a POS printer. Used for backup when
COM 1 malfunctions.
Main Panel
LED indicators
Power
Turned on when properly connect to power supply.
COM 1
Turned on when output is switched to COM1.
Note:
 When COM 1 and COM 2 are blinking simultaneously, this
means that Terminal Server configuration is not set correctly.
Please check the settings in Terminal Server of your Gateway/
Controller.
 When COM 1 and COM 2 are turned on simultaneously, this
means that the system is in safe mode.
COM 2
Turned on when output is switched to COM2.
Note:
 When COM 1 and COM 2 are blinking simultaneously, this
means that Terminal Server configuration is not set correctly.
Please check the settings in Terminal Server of your Gateway/
Controller.
 When COM 1 and COM 2 are turned on simultaneously, this
means that the system is in safe mode.
Link / Act
Turned on when LAN port is connected to an upstream networking
device such as a switch or Gateway/Controller.
100 Mbps Turned on when LAN port is connected at 100Mbps Fast Ethernt.
7 Segment
Displays an integer between 0 ~ 9 which indicates the billing plan
number selected.