PLANET WSG-500 - Manual (Page 12)

12
Step2: Attach WSG-ACG5 to a power supply using the adapter provided in the
package. Connect the administrator PC to the Ethernet Port of WSG-ACG5
via an Ethernet cable. Launch a web browser and type in the default IP
address of WSG-ACG5 in the address field (http://192.168.1.10), the
web interface of WSG-ACG5 should appear.
Step3: Change WSG-ACG5 Network Settings if necessary so that the IP address
of WSG-ACG5 is under the same subnet as the Gateway/Controller’s
interface, which WSG-ACG5 will be connected to. Click Apply to save the
settings.