PLANET ICA-H612 - Manual (Page 63)

• Sequential Preset Points Setting
Please setup each Preset Point of the programmed Sequence Line in order, assigning a Preset Point
from the “Name” list for the specified number of Preset Point and entering both Dwell Time (0~225) and
Speed (0~20) into the corresponding fields.
When finishing the sequential Preset Points setting, please click the button “Save” in the top of the
Sequence setting menu.
Sequence Run
Select the specified Sequence Line from the drop-down list, press the “Go” button, and then the
camera will start moving forward each scene sequentially as programmed.
To view the camera executing a Sequence Line in full screen mode, please move the cursor onto the
live view pane, right-click and left-click to select “fullscreen”. Then users can view the camera
navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera
in any direction.
4.5.5 Home
Users are able to set an operation mode to ensure constant monitoring. If the Speed Dome IP Camera
idles for a period of time, the selected function will be activated automatically; this is the HOME function.
The HOME function allows constant and accurate monitoring to avoid the Dome Camera idling or
missing events.
- 63 -