PLANET ICA-H612 - Manual (Page 12)

STEP 2.
Rotate the Outdoor Mount Kit, and take it off from the camera body.
STEP 3.
Attach the dome cover to the camera body. Before doing that, apply some lubricant on the cover’s
water-proof rubber to make the installation process smoother.
Note
The tiny protrusion on the dome cover must align with one of the four holes on the dome
body.
STEP 4.
Gently pressure the dome cover downward with two hands on the side of it. DO NOT press the cover, as
shown in the figure; this might cause damage to the camera body.
- 12 -