PLANET WNRT-627 - Manual (Page 44)

User’s Manual of WNRT-627
-37-
The page includes the following fields:
Object Description
User Name/Password Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Disabled The Secondary Connection is disabled by
default, so there is PPPoE connection only.
This is recommended.
Dynamic IP You can check this radio button to use Dynamic
IP as the secondary connection to connect to
the local area network provided by ISP.
Secondary Connection
Static IP You can check this radio button to use Static
IP as the secondary connection to connect to
the local area network provided by ISP.
Connect on Demand In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (
Max Idle Time) and
be re-established when you attempt to access the Internet again. If
you want your Internet connection to keep active all the time,
please enter “0” in the Max Idle Time field. Otherwise, enter the
number of minutes you want to have elapsed before your Internet
access disconnects.
Connect Automatically The connection can be re-established automatically when it was
down.
Time-based Connecting The connection will only be established in the period from the start time
to the end time (both are in HH:MM format).
) Note:
Only when you have configured the system time on System Tools
-> Time page can the Time-based Connecting function take
effect.
Connect Manually You can click the Connect/ Disconnect button to
connect/disconnect immediately. This mode also supports the Max
Idle Time function as Connect on Demand mode. The Internet
connection can be disconnected automatically after a specified
inactivity period and re-established when you attempt to access the
Internet again.
Table 5-4
Sometimes the connection cannot be terminated although you specify a time to
Max Idle Time, since some applications are visiting the Internet continually in the
background.