PLANET WNRT-627 - Manual (Page 30)

User’s Manual of WNRT-627
-23-
The page includes the following fields:
Object Description
Wireless Radio Enable or disable the wireless radio choosing from the pull-down list.
Wireless Network
Name (SSID) Enter a value of up to 32 characters. The same name of SSID (Service Set
Identification) must be assigned to all wireless devices in your network.
Considering your wireless network security, the default SSID is set to be
default. This value is case-sensitive. For example, PLANET is NOT the
same as planet.
Region Select your region from the pull-down list. This field specifies the region
where the wireless channel of the router can be used.
Channel This field determines which operating frequency will be used. The default
channel is set to Auto, so the router will choose the best channel
automatically. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
Mode This field determines the wireless mode which the Router works on.
Channel Width Select any channel width from the pull-down list. The default setting is
automatic, which can adjust the channel width for your clients automatically.
Max Tx Rate You can limit the maximum transmission rate of the Router through this
field.
Disable Security The wireless security function can be enabled or
disabled. If disabled, the wireless stations will be able
to connect to the Router without encryption. It is
recommended strongly that you choose one of
following options to enable security.
WPA-PSK /
WPA2-PSK WPA-PSK/WPA2-PSK - Select WPA based on
pre-shared passphrase.
PSK Password - You can enter ASCII or
Hexadecimal characters.
For ASCII, the key can be made up of any numbers 0
to 9 and any letters A to Z, the length should be
between 8 and 63 characters.
For Hexadecimal, the key can be made up of any
numbers 0 to 9 and letters A to F, the length should be
between 8 and 64 characters.
Please also note the key is case-sensitive.
Wireless Security
No Change If you choose this option, wireless security
configuration will not change.
Table 4-1