PLANET WNRT-627 User Manual
Page 37
User’s Manual of WNRT-627
-30-
To build a successful connection by WPS, you should also do the corresponding
configuration of the new device for WPS function meanwhile.
I. By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Step 1: Press the WPS/Reset Button on the front panel of the Router.
Figure 5-4
Or you can keep the default WPS Status as Enabled and click the Add device button in
,
then the following screen will appear.
Figure 5-5
Choose
Press the button of the new device in two minutes, and click Connect.
When pressing and holding the WPS/Reset Button on the router for more than 5
seconds, you will reset the router.