PLANET WNRT-300 - Manual (Page 39)

User’s Manual of WNRT-300
-33-
4.4.7. WPS
Choose menu “Wireless  WPS”, and you can configure the setting for WPS (Wi-Fi Protected Setup).
After the configuration, please click the “Apply Changes” button to save the settings.
Figure 4-18 WPS (Wi-Fi Protected Setup)
Object Description
Disable WPS You can check the box to disable the WPS function.
WPS Status Here you can check if the connection via WPS is established or not.
Self-PIN Number It is the PIN number of the WNRT-300 here.
Push Button
Configuration
Click the “Start PBC”, and then activate WPS as well in the client
device within 2 minutes.
Client PIN Number In addition to the PBC method, you can also use the PIN method to
activate the WPS. Just enter the PIN number of the client device in the
field, and click the “Start PIN” button.
4.4.8. Schedule
Choose menu “Wireless  Schedule”, and you can configure the schedule rule of enabling wireless
function. After the configuration, please click the “Apply Changes” button to save the settings.