PLANET WNAP-6300 - Manual (Page 40)

Chapter 3 Basic Settings Page 31
3.9 Site Survey
Under wireless client mode, the WNAP-6300 is able to perform site survey, through which, information
on the available access points will be detected.
Open “Basic Settings” in “Wireless”, by clicking the “Site Survey” button beside “Wireless Mode”
option, the wireless site survey window will popup with a list of available wireless networks around.
Select the AP you would like to connect and click “Selected” to establish connection. The wireless site
survey window can also be viewed by opening the “Site Survey” page in “Tools”.
Figure 16 Site Survey