beautypg.com

Figure 7 complete set – PLANET WNAP-6300 User Manual

Page 18

background image

Chapter 2 Hardware Installation Page 9

5.

Plug the other side of the Ethernet cable as shown in Step 3 into the PoE port of the PoE injector

and get the complete set ready.

Figure 7 Complete Set

Be reminded, the UTP wire distance toward your WNAP-6300 to the Ethernet devices,

such as Ethernet Switch, is 100 meters, this passive POE injector can be in any point

of this 100 meters UTP distance where there is a shell or protected location for this

POE injector.

The POE injector is with one POE port and one LAN port, NEVER connect the POE

port to any other Ethernet device besides WNAP-6300 while this injector is powered,

this will damage the connected Ethernet device.

Warning:

Note:

See also other documents in the category PLANET Routers: