PLANET WNAP-6300 - Manual (Page 23)

Chapter 3 Basic Settings Page 14
Wireless Separation Disable
Access Control Disable
Enable/Disable Enable
Read Community Name Public
Write Community Name Private
SNMP
IP Address 0.0.0.0
3.2 System Requirements
Before configuration, please make sure your system meets the following requirements:
A computer coupled with 10/100 Base-TX adapter;
Configure the computer with a static IP address of 192.168.1.x, as the default IP address of
WNAP-6300 is 192.168.1.1. (“x” cannot be 0, 1, nor 255);
A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0 or above,
Netscape or Firefox.
3.3 How to Login the Web-based Interface
The WNAP-6300 provides you with user-friendly Web-based management tool.
Open Web browser and enter the IP address (Default: 192.168.1.1) of WNAP-6300 into the
address field. You will see the login page as below.