beautypg.com

2 hardware installation, Physical connection, Figure 3 move the cover align the rail – PLANET WNAP-6300 User Manual

Page 16: Figure 4 cable connection

background image

Chapter 2 Hardware Installation Page 7

2.2 Hardware Installation

Physical Connection

1.

The bottom of the WNAP-6300 is the movable cover. Grab the cover by pressing the push bolt

and pull it out as the figure shown below.

Figure 3 Move the Cover align the rail

2.

Plug a standard Ethernet cable into the RJ45 port. (Cat5/5e with 8-wire required)

Figure 4 Cable Connection

See also other documents in the category PLANET Routers: