PLANET WDRT-750AC - Manual (Page 83)

User Manual of WDRT-750AC
-77-
10) The following TCP/IP Properties window will display and the IP Address tab is open on this window
by default.
Now you have two ways to configure the TCP/IP protocol below:
 Setting IP address automatically
Select Obtain an IP address automatically and choose Obtain DNS server address automatically as shown
in the figure below:
Figure B-4
 Setting IP address manually
1 Select Use the following IP address radio button.
2 If the Router's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
3 Type the Router’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4 Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can