3 filters setup, Filters setup – PLANET WDRT-750AC User Manual

Page 47

User Manual of WDRT-750AC

-41-

5.6.3 Filters Setup



IP Filters

You can block or allow LAN side clients to access the Internet.

Figure 5-6-3

The page includes the following fields:

Object

Description

 IP Filters:

Enable or disable the IP Filters service.

 IP Address:

Enter the single IP Address or a range of IP address to be filtered.

 Port:

Enter the port range to be filtered. The starting port no. must be less

than ending port no. Generally, the port range is set to be 1-65535.

 Protocol Type:

Select the protocol type to be filtered. You can choose Both.

 Schedule:

Set the valid time for the IP Filters.