PLANET WDRT-750AC - Manual (Page 41)

User Manual of WDRT-750AC
-35-
 IP Address:
The IP address of the WAN provided by your ISP. This entry needs
to be filled when Static PPPoE is selected.
 MAC Address: Press “Clone” to show the MAC Address of this router.
 Primary DNS
Address:
Enter the necessary DNS address provided by your ISP.
 Secondary DNS
Address:
Enter the other DNS address if your ISP provides you with 2 such
addresses, and it is optional.
 Maximum Idle
Time:
The time which is auto disconnecting to ISP.
 MTU: The maximum transmission unit. You can keep it as defaults.
Auto connection: The system automatically keeps dialing for
WAN connection once the connection is broken.
Manual connection: Manually dial to connect the WAN once
powering on the Router.  Connection mode:
Connection in use: The system automatically establishes a
connection when a network access request from the LAN is
received.
5.5.4 PPTP
The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks (VPN).