PLANET WDL-U700 - Manual (Page 44)

300Mbps Dual Band 802.11n Wireless USB Adapte r
WDL‐U700
4.4.2 PIN Input Config (PIN)
a. To use the PIN method, select “PIN / numeric code” and, in the “WPS AP List” field, select the
name of the network to which you connecting. Click the right arrow to save your settings.
b. You can use either the PIN provided by the Wireless Utility or the PIN provided by the device to
which you are connecting.
 PIN provided by the Wireless Utility.
If the device to which you are connecting requires a PIN, in the '”Config Mode” field, from the
drop-down list, select “Enrollee”. Your PIN is displayed in the “Pin Code” field on your Utility. Then
in the corresponding WPS interface on the device, to which you are connecting, enter your PIN in
its PIN entry field.
If the device to which you are connecting provides a PIN (e.g. on the device casing), in the
“Config Mode” field, select “Registrar”. In the “Pin Code” field, type the PIN provided by the
device to which you are connecting.
To optionally configure the connection name and security type on your WPS connection, click the
“WPS Profile” button. Otherwise leave settings at their default and click the right arrow to save
your settings.
 PIN provided by the device to which you connecting.
44