PLANET IAP-2000PE - Manual (Page 67)

User’s Manual of IAP-200x Series
-66-
Figure 4-28
VLAN Mode Setting

Mode: You can enable or disable the VLAN here.
Management VID

VID: Set the management VLAN of the IAP-2000.
VLAN Member Configuration
Object Description
 VLAN Group: You can select enable or disable.
 VID: Set the VID here for each Virtual LAN.
 Port 1~4: It means the LAN port on the IAP-2000.
You can set the PVID for each port here.  PVID:
 Port Priority: You can decide the priority of each port here.
Click Apply to make the configuration take effect. Click Cancel to cancel the new configuration.