PLANET IAP-2000PE - Manual (Page 41)

User’s Manual of IAP-200x Series
-40-
 Multiple SSID
1/2/3/4/5:
There are 5 multiple SSIDs. Enter their descriptive names that you want to
use. Please enable VLAN function (section 4.6.3) first before using Multiple
SSID.
 Broadcast Network
Name (SSID):
Select Enable to allow the SSID broadcast on the network, so that the STA
can find it. Otherwise, the STA can not find it.
 AP Isolation:
Enable or disable AP Isolation. When many clients connect to the same
access point, they can access each other. If you want to disable the access
between clients which connect the same access point, you can enable this
function.
 MBSSID AP Isolation:
Enable this function will turn off connection between clients with different
MBSSID. Example: The client connected with BSSID 1. When enable this
function, it will not connect with BSSID 2. Only can access between clients
with SSID 1.
 BSSID:
Basic Service Set Identifier. This is the assigned MAC address of the station
in the access point. This unique identifier is in Hex format and can only be
edited when Multi BSSID is enabled in the previous screen.
 Frequency (Channel):
A channel is the radio frequency used by wireless device. Channels
available depend on your geographical area. You may have a choice of
channels (for your region) and you should use a different channel from an
adjacent AP to reduce the interference. The Interference and degrading
performance occurs when radio signals from different APs overlap.
HT Physical Mode
Figure 4-14-2