PLANET WNAP-7320 - Manual (Page 76)

User Manual of WNAP-7320
-68-
5.5.5 IPv6
Use this section to configure your IPv6 Connection type. If you are unsure of your connection method, please
contact your Internet Service Provider.
Figure 5-5-13
The page includes the following fields:
Object Description
 IPv6 Connection Mode
Choose the mode to be used by the AP/Router to the IPv6 Internet.
There are 7 connection modes available:
Static, SLAAC, DHCPv6, 6to4 Tunnel, 6in4 Tunnel, PPPoE, and
Pass Through.
 DNS Address Server
Setting
Enter the IPv6 Primary DNS & IPv6 Secondary DNS to this section.
 Prefix Delegation
Setting
Enter the IPv6 Prefix Delegation information provided by your
Internet Service Provider (ISP).
 LAN IPv6 Address
Setting
Use this section to configure the internal network settings of your
AP/Router. If you change the LAN IPv6 Address here, you may need
to adjust your PC network settings to access the network again.
 LAN Address Auto IPv6 offers two types of autoconfiguration: Stateful (DHCPv6) &