PLANET WNAP-7320 - Manual (Page 59)

User Manual of WNAP-7320
-51-
 Protocol
The protocol used for this application, either of TCP, UDP, or
TCP&UDP (all protocols are supported by the Device.).
 Comment Make a comment to help identify the setting.
5.4.3 DMZ
Figure 5-4-3
The page includes the following fields:
Object Description
 DMZ Settings Select Enable to enable the DMZ function.
 DMZ IP Address
To support DMZ in your firewall design, fill in the IP address of
DMZ host that can be access from the WAN interface.
5.4.4 Firewall