PLANET WNAP-7320 User Manual

Page 45

User Manual of WNAP-7320

-37-

Please refer to the procedure listed as following to configure using Planet Easy DDNS service.

Step 1. Select “Enable Easy DDNS” to use the Planet Easy DDNS service.

Easy Domain Name: Display the specified domain name for this device. (format:

plxxxxxx.planetddns.com

xxxxxx

is the last six-digit of the WAN Port MAC address)

Figure 5-3-15

Step 2. Go to “Advanced-> Firewall Settings-> Firewall” to allow remote access from WAN port.

Figure 5-3-16

Step 3. Go to “Advanced-> Network Settings-> WAN” to configure WAN Connection using Static (Fixed IP).

Figure 5-3-17

Step 4. Apply the settings, and connect your WAN port of the Wireless AP to the internet by Ethernet cable.

Step 5. In a remote computer, enter the Easy Domain Name displayed in the

. Then, you should be able

to login the WNAP-7320 remotely.

Please remember to enter the remote management port number that you have configured in Step 3.