PLANET WNAP-7320 User Manual

Page 44

User Manual of WNAP-7320

-36-

Step 4. Go to “Advanced-> Network Settings-> WAN” to configure WAN Connection using Static (Fixed IP).

Figure 5-3-12

Step 5. Apply the settings, and connect your WAN port of the Wireless AP to the internet by Ethernet cable.

Step 6. In a remote computer, enter the DDNS host name as the figure shown as below. Then, you should be

able to login the WNAP-7320 remotely.

Please remember to enter the remote management port number that you have configured in Step 3.

Figure 5-3-13

You can go to

My Devices

page of Planet DDNS website to check if the “Last Connection IP” is displayed.

This indicates your DDNS service is work properly.

Figure 5-3-14

Example of Easy DDNS Settings:

This service is not required to register any DDNS account.