PLANET WNAP-7320 - Manual (Page 47)

User Manual of WNAP-7320
-39-
5.3.2.4. SNMP Settings
Enable SNMP function will allow the network management station to retrieve statistics and status from the
SNMP Agent in the device.
Figure 5-3-21
The page includes the following fields:
Object Description
 SNMP Settings
Choose Enable to open this function if you want to have
remote control through SNMPv1/v2 agent.
Choose Disable to close this function.
 Get Community
Enter the community name that allows Read-Only access to
the Device's SNMP information. The community name can be
considered a group password. The default setting is public.
 Set Community
Enter the community name that allows Read/Write access to
the Device's SNMP information. The community name can be
considered a group password. The default setting is private.
5.3.3 Advanced – Operation Mode
There are 4 operation modes (AP Router, AP Bridge, Client Router, Client Bridge) can be configured to meet
various applications.