PLANET GT-90x Series - Manual (Page 54)

4.7.4 802.3ah Setup
When enable 802.3ah OAM function, all 802.3ah OAMPDU packets will trap to embedded CPU.
Software will implement auto discovery procedure. With hardware support, software controls the 802.3ah remote loop
back procedure. Hardware can also detect dying gasp even and interrupt CPU to send dying gasp even notification
OAMPDU. All other functions defined by 802.3ah are implemented using embedded CPU.
When remote device is in loop back mode, hardware can support change looped test frame’s DA, SA or both as user
defined. Hardware can also set to don't change looped test frame.
This function provides 802.3ah Setup of Managed Media Converter. Press the “Apply” button to save the current
configuration of Managed Media Converter. The screen in
Figure 4-39 appears and Table 4-15 describes the 802.3ah
Setup object of Managed Media Converter.
Figure 4-39 802.3ah Setup Web Page screen
The 802.3ah Setup Web page includes the following configurable data:
802.3ah OAM State Provide disable or enable the 802.3ah OAM State function. Default mode is Enable.
802.3ah OAM Mode Allow to choose “Active” or “Passive” for 802.3ah OAM Mode. Default mode is
Passive
.
Loopback Reply Provide disable or enable the Loopback Reply function. Default mode is Enable.
Remote OAM Configure Provide disable or enable the Remote OAM Configure function. Default mode is
Enable
.
Remote OAM Configuration
Result Display the Remote OAM Configuration Result.
Apply button Press this button for save current configuration of Managed Media Converter.
Table 4-15 Descriptions of the 802.3ah Setup Web Page Screen Objects
-49-