PLANET GT-90x Series - Manual (Page 23)

4.2.2 IP Configuration
The IP Configuration includes the DHCP Client, IP Address, Subnet Mask, Gateway and Description. The screen in Figure
4-3 appears and Table 4-2 describes the IP Configuration object of Managed Media Converter.
Figure 4-3 IP Configuration Web page screen
The IP Configuration Web page screen includes the following configurable data:
DHCP Client
Allow disable or enable the DHCP Client function of the Managed Media Converter, the factory
default mode is Disable.
IP Address Allow assigning a new IP address for the Managed Media Converter, the factory default IP address
is 192.168.0.100.
Subnet Mask Allow assigning a new subnet mask for the Managed Media Converter, the factory default subnet
mask is 255.255.255.0.
Gateway Allow assigning a new gateway for the Managed Media Converter, the factory default gateway is
192.168.0.254.
Description Allow to input a new description for the Managed Media Converter, up to maximum 32 characters
allow.
Apply button Press “Apply” button for save current configuration of Managed Media Converter.
Table 4-2 Descriptions of the IP Configuration Web Page Screen Objects
#
Notice:
After change the default IP subnet address, if you forget the IP subnet address. Please press the
“Reset”
button in the front panel of Managed Media Converter for 10 seconds, the current setting
will be lost and the Managed Media Converter will restore to factory default mode.
-18-