PLANET GT-90x Series - Manual (Page 30)

Figure 4-13 SNMP Trap Receiver Configuration Web page screen
The SNMP Trap Receiver Configuration Web page includes the following configurable data:
SNMP Trap Allow disable or enable the SNMP Trap function, the default mode is “Disable”.
SNMP Trap Destination Allow input the IP address of SNMP Trap Destination.
Cold Start When Managed Media Converter executes Cold Start operation, the
administrator PC (SNMP Trap Destination) will receive a Cold Start Trap.
Warm Start When Managed Media Converter executes Warm Start operation, the
administrator PC (SNMP Trap Destination) will receive a Warm Start Trap.
Login Fail When Web login fail situation appears on Managed Media Converter, the
administrator PC (SNMP Trap Destination) will receive a Login Fail Trap.
Link Up When TP or Fiber port connection is build up, the administrator PC (SNMP Trap
Destination) will receive a Link Up Trap.
Trap Event
Link Down When TP or Fiber port connection is Disconnect, the administrator PC (SNMP
Trap Destination) will receive a Link Down Trap.
Apply button Press “Apply” button for save current configuration of Managed Media
Converter.
Table 4-5 Descriptions of the SNMP Trap Receiver Configuration Web Page Screen Objects
-25-