PLANET VIP-255PT - Manual (Page 39)

some other phone settings by the Phone interface.
Administrator/User Password
Administrator mode grants unlimited access to the phone configuration on both web and phone user
interface. The administrator/user password is used to access:
Web interface along with user name.
the advance settings of the phone such as Network, Account, Reset to Factory
Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web interface access is
admin.
To change the administrator password via Phone interface:
1. Press Menu->Settings->Advanced Settings->Set admin password->Enter.
2. Enter the Current PWD, New PWD and Confirm PWD, then press the Save hot key to save the
change.
To change the administrator password via Web interface:
Choose Security, choose User Type, enter the Current Password, New Password and Confirm
Password, then click the Confirm button to save the changes, or Cancel button to cancel the changes.
Reboot
You should reboot the phone when you are challenged, e.g. after applying changes to the phone
configuration.
To reboot via Web interface:
1. Choose Upgrade->Basic.
2. Choose Reboot button.
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed and the phone is
39
Í Note
You can only reboot from Web interface. Please do not power
off during reboot, or it will lead to the flash memory error.