PLANET VIP-255PT - Manual (Page 37)

Field Name Description
As an Bridge
If you select the Bridge mode, then the two Fast Ethernet ports will
be transparent.
As an Router If you select the Router mode, the SIP phone will work as a router.
IP address User could configure the PC port IP address.
DHCP Server
If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address
and the end IP address. But if you select the bridge mode, the
DHCP server can not work.
Start IP Address Indicate the range of the IP address.
End IP Address Indicate the range of the IP address.
To configure PC settings via Phone interface:
1. Press Menu->Settings->Advanced Settings->Network->Enter.
2. Scroll to PC Port option, press Enter.
3. If you choose Bridge, it will return to the previous menu.
4. If you choose Router, you will be prompted to enter the IP, Subnet Mask, and DHCP Server.
5. Press Save hot key to save the changes, or Back to return to the previous menu.
To configure PC Port settings via Web interface:
Choose Network->PC Port to do the relating configuration. You can consult your system administrator
for more information.
VLAN Setting
VLAN is a group of hosts with a common set of requirements that communicate as if they were
attached to the Broadcast domain, regardless of their physical location. The following table lists the
instruction of the field about the VLAN Setting.
37
Field Name Description
QoS
When the network capacity is insufficient, QoS could provide
priority to users by setting the value.