Appendix a networking connection, A.2 10/100mbps, 10/100base-tx, Data – PLANET ISW-504PS User Manual
Page 86: Witch, Rj-45, Ssignments, 10/100m, 10/100b
User’s Manual
APPENDIX A NETWORKING CONNECTION
A.1 DATA OUT PoE Switch RJ-45 Port Pin Assignments (Port 1
to Port-4)
PIN NO
RJ-45 SIGNAL ASSIGNMENT
1
• Output Transmit Data +
• Power +
2
• Output Transmit Data –
• Power +
3
• Receive Data +
• Power -
4
-
5
-
6
• Receive Data –
• Power -
7
-
8
-
A.2 10/100Mbps, 10/100Base-TX
When connecting your 10/100Mbps Ethernet Switch to another switch, a bridge or a hub, a straight or crossover cable is
necessary. Each port of the Switch supports auto-MDI/MDI-X detection. That means you can directly connect the Switch to
any Ethernet devices without making a crossover cable. The following table and diagram show the standard RJ-45
receptacle/ connector and their pin assignments:
RJ-45 Connector pin assignment
Contact
MDI
Media Dependant Interface
MDI-X
Media Dependant Interface-Cross
1
Tx + (transmit)
Rx + (receive)
2
Tx - (transmit)
Rx - (receive)
3
Rx + (receive)
Tx + (transmit)
4, 5
Not used
6
Rx - (receive)
Tx - (transmit)
7, 8
Not used
-86 -