PLANET ISW-504PS - Manual (Page 42)

User’s Manual
4.3.9 Alert Trap Configuration
This function displays the Industrial PoE Switch alert trap configuration; include “Enable” or “Disable” the trap mode and
set the alert IP address. As shown in
Figure 4-20 and description on Table 4-7.
Figure 4-20 Alert Trap Configuration screen
Object Description
Trap mode Can choose enable/disable to get the trap
Alert IP address Assign one IP address of host to receive SNMP trap from the device.
Trap event Choose the events to send the SNMP trap. The trap events include:
„ Cold Start
„ Login Fail
„ Password changed
„ IP Changed
„ Link up
„ Link down
„ PoE Alert
Table 4-7 Descriptions of the Alert Trap Configuration
-42 -