PLANET ISW-504PS - Manual (Page 44)

User’s Manual
4.4 Port Management
In this chapter, there are three sub-functions can be configure and monitor about network interfaces:
„ Port Configuration
„ Port Status
„ Port Security
4.4.1 Port Configuration
This section introduces detail settings of per port of Industrial PoE Switch as shown in Figure 4-24 and Table 4-8 describes
the Port Setup objects of Industrial PoE Switch.
Figure 4-24 Port Setup Web Page screen
The page includes the following configurable data:
Object Description
Port Indicate port 1 to port 5.
Link Display the current Port link status.
Mode Allow configuration the port speed and operation mode. Draw the menu bar to
select the mode
• Auto Speed - Setup Auto negotiation
• 10 Half - Force sets 10Mbps/Half-Duplex mode
• 10 Full - Force sets 10Mbps/Full-Duplex mode
• 100 Half - Force sets 100Mbps/Half-Duplex mode
• 100 Full - Force sets 100Mbps/Full-Duplex mode
• Disable - Shutdown the port manually
Default: Auto Speed
Ingress Rate Limit
The value of inbound traffic limitation in kilobit-per-second (kbps).
Default : No Limit
-44 -