PLANET ICA-3550V - Manual (Page 63)

5 Mega-pixel Outdoor IR PoE IP Camera
ICA-3550V
63
into "Default" and the other side into
ND" on the terminal block as the picture is shown below.
Appendix A. Factory Default
To recover the default IP address and password, please follow the steps:
• Remove the power and Ethernet cable.
• Take an electronic wire, plug one side of the wire
"G
• Connect power to the camera again. It takes around 30 seconds to boot the camera.
• Remove the wire and plug in the Ethernet cable after the camera finishes booting.
• Login the camera using the default IP
(http://192.168.0.20 ) where both user name and
password are admin.