1 vlan static list, 1 to create a new vlan group, 2 to remove a vlan group – PLANET GSW-1402S User Manual
Page 23: 3 to modify a vlan group, 2 vlan static table, 5 vlan page
19
4.5 VLAN Page
There are three tabs in VLAN Page: VLAN Static List, VLAN Static Table, and VLAN Port
Configuration. Please refer to section 3.5.2 IEEE802.1Q TAG VLAN for further details.
4.5.1 VLAN Static List
This screen is used to Add / Remove / Modify VLAN and up to 255 groups. The VLAN
groups that have been created are all listed here.
4.5.1.1 To Create A New VLAN Group
1. Specify the name for the new VLAN group (VLAN name is only used for
identification).
2. Enter a number (VLAN ID) for the new VLAN group.
3. Check the
“Active” box to activate the VLAN or leave it blank and activate it
afterward.
4. Click < 4.5.1.2 To Remove A VLAN Group 1. Select a VLAN group you want to remove from the “Current” list. 2. Click Remove>> button to remove it. disabled because no one can communicate with it. 2. If one port ’s PVID is equal to this VLAN ID, removing this VLAN group will not allow until you change it. 4.5.1.3 To Modify A VLAN Group 1. Select a VLAN group you want to remove from the current list “New” column 3. Click Modify button to submit the new parameters 4.5.2 VLAN Static Table This screen is used to Add/Remove member ports of a VLAN.
Note: 1. If a removed port is no longer belong to any other group, it is temporarily
2. Modify parameters in