PLANET FNSW-1602S - Manual (Page 18)

16 17
Object Description
Trunk [Port 1~2] Allow user to disable or enable Trunk function on port 1
and port 2.
Trunk [Port 9~10] Allow user to disable or enable Trunk function on port 9
and port 10
Table 3-5 Descriptions of the Trunk Configuration screen Objects
3.2.3.3 VLAN Configuration
Use the “TAB” key to move the highlight to the VLAN Configuration and press “Enter” to
access the screen of VLAN Configuration from the Switch Configuration screen (please see
the figure 3-5). The screen of VLAN Configuration in Figure 3-9 appears. Table 3-6 shows
the descriptions of the VLAN Configuration Menu Objects. The FNSW-1602S support up
to 18 port-based VLAN groups. Each port can be assigned to different group at the same
time.
Figure 3-9 VLAN Configuration Screen
Object Description
Create a VLAN
Group Allow user to create new VLAN group. Maximum up to 18
port-based VLAN groups.
Edit/Delete a
VLAN Group Allow user to edit the existing VLAN group or delete existing
VLAN group.
Previous Menu Back to Switch Configuration screen.
Table 3-6 Descriptions of the VLAN Configuration screen Objects