PLANET FGSW-1602RS - Manual (Page 19)

16 17
Be noted, the switch support dual priority per port, the QoS setting will base on the menu
above to arrange each port’s high/low priority.
3.4.5 Priority tag Insert/Remove
In this menu, user is able to insert or remove Priority tag each port. The option includes:
Insert Tag (high priority only), Insert Tag (all frame), Remove Tag and Don’t Touch.
Please also refer to VLAN section 3.4.6 and 3.4.7 for more.
Insert Tag
(high priority only):
Insert priority tag into the untagged high-priority frame
Insert Tag
(all frame):
Insert priority tag into the all untagged frame
Remove Tag: Remove the VLAN tag from all tagged frame
Don’t touch: The default setting, which means no modify
3.4.6 VLAN Global Control
This menu is allow user to enable VLAN’s global capabilities including, VLAN function,
Unicast packet Inter-VLAN Leaky, ARP broadcast packet Inter-VLAN Leaky, IP Multicast
packet Inter-VLAN Leaky, 802.1Q VLAN tag aware, Ingress Rule for Acceptable frame type
and Ingress Rule for Ingress Filtering.
VLAN function Enable VLAN, Default disable
Unicast packet
Inter-VLAN Leaky Enable the packet to be forward to a destination port at
different VLAN. Default: disable
ARP broadcast
packet Inter-VLAN
Leaky Enable ARP frame to broadcast to all switch port
Default: disable
IP Multicast packet
Inter-VLAN Leaky Enable multicast to be flood to all the multicast group
member. Default: disable